ecos-discuss archive
thread index for September, 2001
This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Messages are ordered newest-to-oldest in this index. The newest
threads will be at the top of this page, the oldest will be at the bottom.
Within a single thread, the first mail note is the START of the thread;
the notes following that are in the chronological order of when they
were received. So globally, newest messages are at the top, but within
a thread, the oldest (the start of the thread) is at the top.
If you think about it, it is confusing. Just go with the flow and
everything will be all right.
- About compression&Decompression.],
sreenivas y.p.s.s
- Rebuilding RedBoot for Evaluator 7T board,
Chris Garry
- About compression&Decompression.,
sreenivas y.p.s.s
- How can I use Zlib sources support in RedBoot,
sreenivas y.p.s.s
- quetions about tcgetattr(),
li hui
- RE: TCP/IP performance under eCos & other compilers than gnu,
Fabrice Gautier
- TCP/IP performance under eCos & other compilers than gnu,
Richard Wicks
- eCos port to ipEngine,
Vicki Beggs
- eCos in vmware,
David Airlie
- [PATCH] Termios noncanonical mode support,
Luoqi Chen
- Re: problem with redboot's fis create -n option,
todd.kallam
- i386 HAL, stack segment not initialised,
Ian Campbell
- problem with redboot's fis create -n option,
todd.kallam
- Confused at redboot.bin and redboot.elf...,
Vive l'amour
- UITRON build error,
Ravi Kumar B S
- Bug: enabling I-cache,
Christoph Csebits
- Re: Problem in porting GoAhead Web server on ep7212,
Peter Graf
- Problem in porting GoAhead Web server on ep7212,
Balaji TS
- hal_default_isr ??,
Tony Ko
- Ctrl-C on TCP problem,
Damir Salantic
- Re: Serial I/O read,
harri.siirtola
- RE: Flash Programming Example with ecos,
Simpkins, Andy
- Sending network broadast packet.,
Mervyn Wongso
- i386 CYG_HAL_STARTUP_FLOPPY,
Stephen Polkowski
- [Fwd: how to modify the header files for eb40 to meet a custom board],
Jonathan Larmour
- Flash Programming Example with ecos,
Jeffrey Jopling
- RE: FLASH driver problems on eCos 1.3.1 for edb7312,
Dan Conti
- RE: Build error,
Tim Michals
- FLASH driver problems on eCos 1.3.1 for edb7312,
Chris Sekula
- RE: ARM Debuggers backtrace,
Fabrice Gautier
- Build error,
Tim Michals
- hal/arm/sa11x0/ipaq/current/include/hal_platform_setup.h,
Richard Panton
- Re:e7t ROM startup,
Ravi Kumar B S
Re: newbie question - EB40 serial,
harri.siirtola
newbie question - EB40 serial,
Joerg Manderbach
About compression and Decompression ???,
sreenivas y.p.s.s
eCos for Intel StrongARM Assabet,
Raymond Wong
AW: 2nd redboot on edb7211 - FLASH,
Edelmann Thomas
Tool chains, and I386,
Gregg C Levine
Mutex optimization for uncontested cases,
Luoqi Chen
ARM Debuggers backtrace,
Fabrice Gautier
how to modify the header files for eb40 to meet a custom board,
Shaojie Wu
Bug (I think) in ethernet driver for XScale 80310,
Richard Wicks
Serial I/O read,
Greg Marsden
ecos port on ARM Evaluator 7T board,
Chris Garry
Re: DP83902A driver,
Jonathan Larmour
more booting from ix86 floppy,
Kĺre Särs
RE: FLASH configuration checksum error,
Warren Jasper
- Re: FLASH configuration checksum error,
Jonathan Larmour
- RedBoot serial or network ?,
Pushparaj
- Re: RedBoot serial or network ?,
Gary Thomas
- TFTP bug,
Pushparaj
- STL?,
Mathieu Routhier
- RE: STL?,
Mathieu Routhier
- Re: TFTP bug,
Gary Thomas
- Re: TFTP bug,
Pushparaj
- Re: TFTP bug,
Jonathan Larmour
- Re: TFTP bug,
Pushparaj
- Re: TFTP bug,
Jonathan Larmour
- Re: TFTP bug,
Gary Thomas
- Re: TFTP bug,
Pushparaj
- Re: TFTP bug,
Mark Salter
- Re: TFTP bug,
Gary Thomas
- <Possible follow-up(s)>
- RE: FLASH configuration checksum error,
Warren Jasper
- RE: FLASH configuration checksum error,
Warren Jasper
- RE: FLASH configuration checksum error,
Warren Jasper
edb7xxx D1 LED,
Trenton D. Adams
RE: loading programs to RAM via RedBoot (using minicom on Linux),
Warren Jasper
RE: edb7xxx downloader,
Dan Conti
edb7xxx downloader,
Trenton D. Adams
RE: disassemble binary arm-code,
Trenton D. Adams
loading programs to RAM via RedBoot (using minicom on Linux),
Warren Jasper
RE: Non blocking read,
Ravi Kumar B S
Creating a drop in replacement for the pcmb package,
Ian Campbell
FLASH configuration checksum error,
Warren Jasper
Want help!!,
kuldeep singh
MCore Port,
Arne Steinarson
AT91EB40 networking problem,
Bryan Mok
AW: AW: redboot on edb7211,
Edelmann Thomas
What I need to run "cyg_thread_delay" on redboot(motorola MBX),
syyi04
RE: isoinfra cdl patch,
Fabrice Gautier
isoinfra cdl patch,
Fabrice Gautier
vrc437x virtual vector support,
Motoya Kurotsu
RE: CYGDBG_INFRA_DIAG_PRINTF_USE_VARARG gone?,
Fabrice Gautier
Single precision math library,
luoqi
network packet buffers...,
Fabrice Gautier
RE: --entry= (slightly off topic),
Fabrice Gautier
Thread help!!,
YH Chou
Thread question!!!,
YH Chou
--entry= (slightly off topic),
Trenton D. Adams
RedBoot and Linux,
Tim Michals
semihosting problem,
Shaojie Wu
eCos release,
Fabrice Gautier
Small bugfix for dump_instr.c,
Matt Holgate
RedBoot FLASH config suggestion,
Trenton D. Adams
RedBoot fis command not working?,
Trenton D. Adams
board port howto,
Shaun Jackman
2nd redboot on edb7211 - FLASH,
Edelmann Thomas
e7t ROM startup,
Vipin Mehta
discontinguous memory setup,
Stefan Eletzhofer
Re: FSTAB_ENTRY,
Andrew Lunn
FSTAB_ENTRY,
Rajeev
RE: Load Redboot RAM through serial,
Fabrice Gautier
Long ethernet connection time for Redboot on EDB7209C,
Strader Alan
What is " inferred_value " in cdl_option?,
Tony Ko
Re: does eCos/GNU debugger supports EmbeddedICE,
Shaojie Wu
does eCos/GNU debugger supports EmbeddedICE?,
Shaojie Wu
Load Redboot RAM through serial,
Trenton D. Adams
RE: ATMEL flash,
Dan Conti
removing FILEIO causes compiler errors,
Trenton D. Adams
CYGDBG_INFRA_DIAG_PRINTF_USE_VARARG gone?,
Trenton D. Adams
RE: Adding commands to RedBoot,
Warren Jasper
re: serial overruns.,
David Airlie
MS DevStudio for eCos development?,
Grant Edwards
ATMEL flash,
Trenton D. Adams
Serial read problems,
Marco Götze
AW: redboot on edb7211,
Edelmann Thomas
Non blocking read,
Ravi Kumar B S
thread suspend/kill/delete,
Robin Farine
Question about Exception and Interrupt default VSR on MPC860,
Tony Ko
Old patch not in CVS...,
Fabrice Gautier
Re: Building eCOS for the first time (or hoping so),
Jonathan Larmour
Redboot build errors for IQ80310 eval board,
Barry Khatri
RE: stubs template,
Afzal, Naeem M
Building eCOS for the first time (or hoping so),
Mathieu Routhier
eCos patch for GCC for ARM,
Fabrice Gautier
getting networking support for Intel XScale 80310 board,
Richard Wicks
Problem While attaching Network interface with Kernel,
Harsha Vardhan Reddy Y
About Boot script problem,
sreenivas y.p.s.s
Flash support in ARM Evaluator 7t,
Ravi Kumar B S
redboot conflicting with ethernet application driver,
Richard Wicks
RE: Using the TCP/IP stack from the anonymous CVS server,
Trenton D. Adams
CTRL-C Support,
Fabrice Gautier
Getting "certified" by RedHat?,
Grant Edwards
build redboot for AT91FR408,
Shaojie Wu
Using the TCP/IP stack from the anonymous CVS server,
Richard Wicks
- RE: Using the TCP/IP stack from the anonymous CVS server,
Trenton D. Adams
- Re: Using the TCP/IP stack from the anonymous CVS server,
Richard Wicks
- Re: Using the TCP/IP stack from the anonymous CVS server,
nicolas lacorne
- Re: Using the TCP/IP stack from the anonymous CVS server,
Richard Wicks
- Re: Using the TCP/IP stack from the anonymous CVS server,
Jonathan Larmour
- Re: Using the TCP/IP stack from the anonymous CVS server,
Richard Wicks
- Re: Using the TCP/IP stack from the anonymous CVS server,
Jonathan Larmour
- Re: Using the TCP/IP stack from the anonymous CVS server,
Richard Wicks
- Re: Using the TCP/IP stack from the anonymous CVS server,
Jonathan Larmour
- Re: Using the TCP/IP stack from the anonymous CVS server,
Richard Wicks
- Re: Using the TCP/IP stack from the anonymous CVS server,
Gary Thomas
- Message not available
- Re: Using the TCP/IP stack from the anonymous CVS server,
Gary Thomas
- Re: Using the TCP/IP stack from the anonymous CVS server,
Jonathan Larmour
- Re: Using the TCP/IP stack from the anonymous CVS server,
Richard Wicks
Serial overruns,
Matt Holgate
Hello Code size,
Dzanh Nguyen
Patch (New package) to the Ecos package to enable use of the DallasWallcolck driver as the hardware driver for the i386 platform,
Rajagopalan Thiruvenkatachary
Help!!!!!!-----Serial driver overrun error?????,
joyee
Adding commands to RedBoot,
Warren Jasper
Problems accessing the AnonCVS repository...,
Arif.Abbas
IPv6 stacks,
Gustav Kälvesten
RedBoot and other companies OS products,
Gregg C Levine
question about REDBOOT operation ( connecting with GDB ),
Tony Ko
stubs template,
Afzal, Naeem M
MORE Question about GDB response operation on Target.,
Tony Ko
MORE question about "VIRTUAL_VECTOR_SUPPORT",
Tony Ko
spin locks,
Andre Asselin
Shameless plug: a VM called Wonka.,
Chris Gray
help ! building redboot for edb7211(ep7211),
xiaocy
strata.h,
Warren Jasper
Why is the parrot loader still present?,
wyeepeng
Question about GDB response operation on Target. : send again because I didn't get reply due to my email server problem.,
Tony Ko
question about "VIRTUAL_VECTOR_SUPPORT" : send again because I didn't get reply due to my email server problem.,
Tony Ko
ARM e7t serial driver,
Ravi Kumar B S
SSI bytes,
Trenton D. Adams
RE: Redboot network setup,
Fabrice Gautier
PCI bus on XScale 80310 board,
Richard Wicks
Flash support for the 28F640J3A,
Warren Jasper
IQ80310 Eval board Source version levels,
Barry Khatri
SERIAL NON-BLOCKING mode in HW independent layer?,
Trenton D. Adams
load kernel with redboot,
Carlo Agostini
MPC8260,
Christoph Csebits
RE: changing ethernet driver,
Arif.Abbas
Question about GDB response operation on Target.,
Tony Ko
question about "VIRTUAL_VECTOR_SUPPORT",
Tony Ko
Redboot network setup,
Fabrice Gautier
non-standard serial baud rates,
Trenton D. Adams
Synchronization problem in IP stack,
Wade Jensen
SPI/SSI driver for EDB7XXX,
Trenton D. Adams
make tests fail when adding romfs package,
Warren Jasper
redboot on edb7211,
Edelmann Thomas
Exists one versione of the gui for x86 ?,
Carlo Agostini
RedBoot FIS question,
Joerg Rapka
Re: AT91 interrupt driven functionality,
harri.siirtola
adding POST to iq80310 - Cyclone,
Afzal, Naeem M
How i will get documentation,
sreenivas y.p.s.s
AT91 interrupt driven functionality,
harri.siirtola
flash size calculation,
Christoph Csebits
Re: long-calls in ARM,
Rafael Rodríguez Velilla
Problem with Arm Integrator port,
Fabrice Gautier
RE: Why 2 82559 drivers?,
Fabrice Gautier
Why 2 82559 drivers?,
Andre Asselin
AMD PCNET ethernet driver?,
Andre Asselin
Re: atomic singly linked lists,
Andre Asselin
RE: libstdc++ working for ecos (linux synthetic or pc target),
Tracy Jones
redboot for moto sandpoint ppc8240?,
jds-ppc
libstdc++ working for ecos (linux synthetic or pc target),
Tracy Jones
XScale IQ80310 ethernet problem,
Richard Wicks
problem building redboot - very strange,
Ravi Kumar B S
Cygwin 1.3.3 and eCos,
Jonathan Larmour
Compiling individual sources,
Rafael Rodríguez Velilla
Debuggers,
Prasad Kamath Nala
Link error when building default redboot ecm for ipaq,
wyeepeng
How to calculate the Real-time clock period?,
Chris C.
How to handle lack of builtin operator new for newer GCCs?,
Richard Chan
RE: Gigabit ethernet card for PCI for Intel XScale IQ80310?,
Fabrice Gautier
RE: uninitialized variable,
Fabrice Gautier
build redboot,
Shaojie Wu
ISR parameter question,
Grant Edwards
Re: catch errors in eCos's kernel,
Jonathan Larmour
uninitialized variable,
Trenton D. Adams
RE: ARM evaluator board port status,
Fabrice Gautier
EDB7XXX pcmcia should be working soon,
Trenton D. Adams
question regarding redboot,
Shaojie Wu
RE: build redboot from the source code,
Warren Jasper
openH323 Stack?,
Colin Ford
sched_get_priority_...,
tom coremans
Setting tty device interrupt priority, spltty(),
Arif.Abbas
Re: some beginners questions,
Jonathan Larmour
Re: gcc 3.0 and cr/lf,
Jonathan Larmour
Re: Re: Problems with RedBoot on x86 generic pc...,
Jonathan Larmour
procedures to rebuild inder win2k,
wu shaojie
Re: Adjusting stack sizes,
Jonathan Larmour
Re: Pthread error,
Jonathan Larmour
Re: Problems with eCos clocks,
Jonathan Larmour
Compaq Wireless LAN card,
Cristiano Ligieri Pereira
build redboot from the source code,
Shaojie Wu
ARM evaluator board port status,
Fabrice Gautier
Questions about GDB Ctrl-C support.,
Grant Edwards
Re: Problem building ecos for arm with thumb instruction set,
Jonathan Larmour
Re: CYGHWR_HAL_ARM_EDB7XXX_DRAM_SIZE - uh ooo,
Jonathan Larmour
Re: Serial Driver + Multithreading,
Jonathan Larmour
Re: what's a good thing for using DSR when interrupt happen ???,
Jonathan Larmour
Re: Debug messages through serial communication port,
Jonathan Larmour
Re: question about modification for edb7312,
Jonathan Larmour
Re: RAM fs build error.,
Jonathan Larmour
Re: spurious interrupt occuring for no apparent reason,
Jonathan Larmour
Re: Need short hint on: Howtoget cygpkg_fs_ram for building redboot for powerpc,
Jonathan Larmour
Re: Thread related queries,
Jonathan Larmour
Re: boot question,
Jonathan Larmour
Re: Performance counter interrupt on XScale,
Jonathan Larmour
RE: Mount point mode and parse errors,
Fabrice Gautier
Mount point mode and parse errors,
Fabrice Gautier
Re: Arm emulator,
Jonathan Larmour
ecosconfig issue,
Afzal, Naeem M
RE: Compile error (Arm evaluator),
Fabrice Gautier
Re: GCC and XScale,
Cristiano Ligieri Pereira
error: i686-pc-linux-gnu-gcc Command not found,
Hong Hsu
tests of packages,
Rafael Rodríguez Velilla
debugging problem through GDB,
Tony Ko
Format of digest e-mail,
phil.gosset
Problem with Networking,
nicolas lacorne
Compile error (Arm evaluator),
Fabrice Gautier
Problems with eCos clocks,
Chris Sekula
resetting board via gdb,
Laurent Gonzalez
Re: gdb 'next' problem with i386 HAL,
Jonathan Larmour
Re: printf,
Jonathan Larmour
Re: Does DHCP work well at arm platform?,
Fano Ramparany
PCMCIA Driver fro EDB7211,
Selvakumar Manickam
Etherboot & eCos,
Christian Axbrink
$B$^$:!"#5I4K|1_$+$i!"J]>Z$+$i:#$HO78eBP:v(B
,
$B>Z5rIU$-#5@iK|1_%S%8%M%9(B
StrongARM port of eCos/Redboot,
Ashley Sutcliffe
Re: tanh,
Hugo 'NOx' Tyson
Re: Loopback patch,
Hugo Tyson
Re: Problems making gcc,
Hugo 'NOx' Tyson
Re: MIPS R3000 patch for MIPS arch,
Nick Garnett
Re: cyg_interrupt_set_vsr and ARM AEB-1,
Hugo Tyson
Re: download application with tcp/ip,
Hugo 'NOx' Tyson
Re: Does Ecos supports Loopback ?,
Hugo 'NOx' Tyson
Re: hi NICK GARNETT - TCP/IP stack of ecos for i386 PC,
Nick Garnett
Re: problem regarding porting of ecos to PC i386,
Nick Garnett
Re: On demand FP context switch major problem.,
Nick Garnett
Re: Creating workers threads dynamically,
Nick Garnett
Re: PowerPC HAL questions.,
Nick Garnett
Re: additional PC (i386) serial ports,
Nick Garnett
Re: A few general questions about HAL.,
Nick Garnett
Re: CYG_INSTRUMENT_CLOCK+PowerPC+FPU problem.,
Nick Garnett
Re: Problem about the uitron test,
Hugo 'NOx' Tyson
Re: HAL_THREAD_INIT_CONTEXT,
Nick Garnett
Re: nc_test_slave.c fix,
Hugo 'NOx' Tyson
Re: Two TCP/IP stack issues...,
Nick Garnett
Re: tcp_sink/source/echo byte ordering,
Hugo Tyson
Re: cyg_thread_kill and info threads,
Hugo Tyson
Re: eCos Device Driver reorganization,
Hugo 'NOx' Tyson
Re: ARM cpu modes,
Hugo 'NOx' Tyson
Re: PC target -- How to build the GDB stub Floppy ?,
Nick Garnett
Re: forwarded message from Satish Nayak,
Hugo 'NOx' Tyson
Applying loopback_patch,
AniL Nambiar
compilation hello program error,
Hong Hsu
eCos Watchdog Timer,
diem.b.dang
RE: Problem in modify ecos for EDB7312,
Dan Conti
twothreads example broken,
Andrew Lunn
serial debugging at speeds greater than 115200 baud,
John Gumb
cyg_create_thread,
Christoph Csebits
Is this mail list still active?,
Al Gambardella
source problem,
song
Re: Downloading to the flash on ARM E7T,
Jesper Skov
Re: Dummy question on interrupts,
Jesper Skov
Re: cygwin building redboot problem,
Jesper Skov
Re: gdb with the synthetic target,
Jesper Skov
synthetic cygwin target ?,
John Gumb
changing ethernet driver,
Arif.Abbas
filesystem on linux,
Stijn Symons
About Entry point,
Prasad Kamath Nala
Stack usage monitoring under POSIX threads,
I-Jui Sung
CYGSEM_KERNEL_SCHED_TIMESLICE,
John Gumb
Re: ethernet driver package idea,
Bart Veer
Problem in modify ecos for EDB7312,
Peihong Li
Re: problem in building ecos host side software,
Bart Veer
Problem with hello ... entry point,
Carlo Agostini
Re: Function long calls in ARM,
Rafael Rodríguez Velilla
Porting OpenBSD PPP to eCos,
David.Karlberg
Help me to run hello world on powerpc simulators,
latish sudheer
eCos for TMS320C6x DSP,
Colin Spier
RE: FLASH file system,
Simpkins, Andy
FLASH file system,
Simpkins, Andy
Hello please help me to run hello world for i386 without connecting hardware,
latish sudheer
About GDB,
Prasad Kamath Nala
No Subject,
U web
iPAQ Network support,
Trenton D. Adams
Serial Driver,
Chris C.
Mail converted by MHonArc
2.4.9