This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Windows CE Restoration on iPAQ 3630 - part II (RedBootError 0x2)
- To: "Manos S. Pappas" <frontier at unwired dot gr>
- Subject: Re: [ECOS] Windows CE Restoration on iPAQ 3630 - part II (RedBootError 0x2)
- From: Gary Thomas <gthomas at redhat dot com>
- Date: 02 Oct 2001 09:10:05 +0900
- Cc: ecos-discuss at sourceware dot cygnus dot com
- References: <ELEPLBNFJHDFIKGKPJNPKEANCBAA.frontier@unwired.gr>
On Tue, 2001-10-02 at 01:20, Manos S. Pappas wrote:
> To complement my last post, regarding the errors issued by RedBoot when I try to perform the steps required to restore Windows CE, here's what RedBoot_WinCE reports after initialization:
>
> FLASH: 0x50000000 - 0x51000000, 64 blocks of 0x00040000 bytes each.
> FLASH configuration checksum error or invalid key
> ... Waiting for network card: .........No network interfaces found
>
> RedBoot(tm) bootstap and debug environment - built 09:51:53, Jun 22 2001
>
> Platform: Compaq iPAQ Pocket PC (StrongARM 1110)
> Copyright (C) 2000, 2001, Red Hat, Inc.
>
> RAM: 0x00000000-0x02000000, 0x0004f000-0x01fb0000 available
> RedBoot>
>
> I assume that there is no need to load a RAM-based RedBoot, when I perform the steps mentioned in the previous mail, in order to restore WinCE.
>
> Please help me!
> ---
> Best Regards,
> Manos S. PappĪ±s frontier@unwired.gr
> Address: D. Synadinou 8, 82100 Chios, GREECE
> PGP key available on request
I don't understand - it seems that you've never installed RedBoot
permanently - only running the Win/CE version. Why do you think you
need to do anything to "restore" Win/CE?
Also, I'd be very interested in seeing any information you had regarding
the errors erasing the FLASH when trying to install RedBoot.