This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]

=?UTF-8?Q?=CE=91=CE=A0:_Windows_CE_Restoration_on_iPAQ_3630_-_part_II_=28R?==?UTF-8?Q?edBootError_0x2=29?=


> -----Αρχικό μήνυμα-----
> Από: Gary Thomas [mailto:gthomas@redhat.com]
> Αποστολή: Τρίτη, 2 Οκτωβρίου 2001 10:45 πμ
> Προς: Manos S. Pappas
> Κοιν.: ecos-discuss@sourceware.cygnus.com
> Θέμα: Re: Windows CE Restoration on iPAQ 3630 - part II (RedBootError
> 0x2)
> 
[...]
> > 
> 
> Do you see any messages on the [LCD] screen about FLASH when RedBoot
> starts up?  Since this is a fairly old version of RedBoot, the 'version'
> command doesn't print this [which is what I was after].
> 
> It looks to me like RedBoot is not able to recognize your FLASH at all.
> I'm truly surprised that it lets you run 'fis init', etc.
> 

Here's what RedBoot prints on the LCD screen upon it boots:

FLASH: 0x50000000 - 0x51000000, 64 blocks of 0x00040000 bytes each.
FLASH configuration checksum error or invalid key
... Waiting for network card: .........No network interfaces found

RedBoot(tm) bootstap and debug environment - built 09:51:53, Jun 22 2001

Platform: Compaq iPAQ Pocket PC (StrongARM 1110)
Copyright (C) 2000, 2001, Red Hat, Inc.

RAM: 0x00000000-0x02000000, 0x0004f000-0x01fb0000 available
RedBoot>

	Can you send me a newer version of RedBoot_WinCE.bin and RedBoot_RAM.bin? I only have a 33.6 modem and downloading the whole packages would take ages (not to mention the fact that I can't be sure if it will work). Thank you.
---
Best Regards,
Manos S. Pappαs        frontier@unwired.gr
Address: D. Synadinou 8, 82100 Chios, GREECE
PGP key available on request

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]