This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Problem about TCP/IP and ARM E7T board
I think the network functions are working well with e7t configuration.
Of course, modifying is necessary.
I am getting the network performance of this kinda plateform.
I have found one thing that I used three or four pc to ping this with 64k
padding
the echo time is usually under 120 ms, sometimes under 90 ms.
But I still found some problems in TCP/IP. I am inspecting that now.
Simon
----- Original Message -----
From: "Jonathan Larmour" <jlarmour@redhat.com>
To: "HuangQiang" <jameshq@liverpool.ac.uk>
Cc: "eCos" <ecos-discuss@sources.redhat.com>
Sent: Wednesday, October 24, 2001 2:01 AM
Subject: Re: [ECOS] Problem about TCP/IP and ARM E7T board
HuangQiang wrote:
>
> Dear all:
> I tried to add the network package(is that the TCP/IP ?) to the eCOS
> configuration and build the library. But before I save the configuration
> there are some conflict and I remove the conflict and build the library
but
> I encounter many problem that I can finish building the library. (I use
the
> ARM E7T Template). Does that mean the network support is not compatible
> with the ARM E7T board setting in eCOS or I did it in the wrong way?
At this point the network isn't supported with the e7t, sorry.
Contributions welcome!
Jifl
--
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine