This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Tests on at91/eb40
- From: Jonathan Larmour <jlarmour at redhat dot com>
- To: Patrick Otto <pepperpino at web dot de>
- Cc: Ecos-Discuss <ecos-discuss at sources dot redhat dot com>
- Date: Thu, 29 Nov 2001 06:19:57 +0000
- Subject: Re: [ECOS] Tests on at91/eb40
- References: <MPEILNIBCDCLJFJCHCNIKEIBCAAA.pepperpino@web.de>
Patrick Otto wrote:
>
> Hi
> Ok, Now i am able to build the tests and i even managed to compile the hello
> world program with gcc and load it to the board and run it. yep. but if i
> want to start the tests out of the conf.tool nothing happens. I can select
> the tests and run it, but nothing happens. what have i to do? (you need to
> know that i am a really beginner with this all stuff (gcc,gdb,insight and
> ecos)). redboot is also on the board. i can connect to it with the
> hyperterminal from w2k, but i can't with gdb-console only with insight.
> although i set remoutebaud and so on..
> why nothing happens with this tests out of the conf.-tool?
> why i cant load them with insight to the board (just came error: cant load
> exec (or similar))?
You have to go to File->Target Setup and choose Remote/Serial, your port
and baud rate first.
As for the console, describe _exactly_ what commands you type, and what you
see.
Jifl
--
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine