This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
ARM AEB-1 download problem
- From: "Koeller, T." <Thomas dot Koeller at baslerweb dot com>
- To: 'ecos-discuss' <ecos-discuss at sources dot redhat dot com>
- Date: Thu, 14 Mar 2002 17:58:59 +0100
- Subject: [ECOS] ARM AEB-1 download problem
I am trying to install the GDB stubs from eCos 1.3.1 on my ARM AEB-1 board.
The method described in the tutorial does not work for me, because I do not
get a prompt from the ROM boot monitor. The first prompt I see is from
Angel.
So I tried the method described for the PID, but that did not work either
(see
transcript below). Anyone able to help me with this?
Thomas
---------------------------------------
$ arm-elf-gdb -nw "/d/program files/red
hat/ecos/loaders/arm-aeb/gdb_module-revC.img"
GNU gdb 5.1.1
Copyright 2002 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain
conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "--host=i686-pc-cygwin --target=arm-elf"...
(no debugging symbols found)...
(gdb) set remotebaud 9600
(gdb) target rdi s=com1
Angel Debug Monitor (serial) 1.04 (Advanced RISC Machines SDT 2.11a) for
AT91EB0x (1.01)
Angel Debug Monitor rebuilt on Sep 14 1998 at 14:52:22
Serial Rate: 9600
Connected to ARM RDI target.
(gdb) load
Invalid download offset: files/red
hat/ecos/loaders/arm-aeb/gdb_module-revC.img
(gdb)
-----------------------------------------------
Thomas Koeller, Software Development
Basler Vision Technologies
An der Strusbek 60-62
22926 Ahrensburg
Germany
Tel +49 (4102) 463-390
Fax +49 (4102) 463-46390
mailto:Thomas.Koeller@baslerweb.com
http://www.baslerweb.com
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss