This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: RedBoot flash programming questions
- From: Jesper Skov <jskov at redhat dot com>
- To: Thomas Asami <thomas_asami at hotmail dot com>
- Cc: eCos Discuss <ecos-discuss at sources dot redhat dot com>
- Date: 25 Apr 2002 08:31:52 +0200
- Subject: Re: [ECOS] RedBoot flash programming questions
- References: <F20x7zUwlCBFUurau6D0000c4e6@hotmail.com>
On Tue, 2002-04-23 at 08:28, Thomas Asami wrote:
> Hi there,
>
> About IQ80310, if I recall correctly, it has a 8M flash and 32M sdram.
> I just want to know if I have a board based on IQ80310, but it has two 16M
> flash
> (total 32M) and 16M sdram, what files should I edit and how to do?
You need to change the MLT files. If you have a Windows host, you can
use the MLT tool in the ConfigurationTool. If you have a Linux host,
edit the .h and .ldi files in an editor (the format should be obvious).
It may also be necessary to change some of the platform SDRAM init code.
Which is likely to be non-obvious.
Jesper
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss