This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: PXA250 lubbock flash memory question on RedBoot
- From: "Leo" <leosbox at hotmail dot com>
- To: <ecos-discuss at sources dot redhat dot com>
- Date: Fri, 3 May 2002 06:49:00 -0400
- Subject: Re: [ECOS] PXA250 lubbock flash memory question on RedBoot
Maybe I misunderstand the question but why not toggle switch
S15 which swaps the nCS0/nCS1 chip selects. Check the user's
guide Flash/Boot memory section.
Regards,
Leo
> ----- Original Message -----
> From: "Thomas Asami" <thomas_asami@hotmail.com>
> To: <ecos-discuss@sources.redhat.com>
> Sent: Friday, May 03, 2002 2:15 AM
> Subject: [ECOS] PXA250 lubbock flash memory question on RedBoot
>
>
> > Hi,
> >
> > Lubbock (code name for the PXA250 Dev. board) has two flash memories.
> > One at CS0 and the other at CS1.
> > The original Intel RedBoot code uses the second flash at CS1.
> > I have my flash at CS0, so redboot cannot find the valid flash at CS1.
> > Would anyone tell me and teach me what files I should modify?
> > Thank you very much!!
> >
> >
> >
> > _________________________________________________________________
> > Chat with friends online, try MSN Messenger: http://messenger.msn.com
> >
> >
> > --
> > Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
> > and search the list archive: http://sources.redhat.com/ml/ecos-discuss
> >
> >
>
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss