This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: PXA250 lubbock flash memory question on RedBoot
- From: Pieter Truter <ptruter at intrinsyc dot com>
- To: 'Thomas Asami' <thomas_asami at hotmail dot com>, leosbox at hotmail dot com, ecos-discuss at sources dot redhat dot com
- Date: Fri, 3 May 2002 06:50:09 -0700
- Subject: RE: [ECOS] PXA250 lubbock flash memory question on RedBoot
I assume there is a Lubbock eCos port somewhere, I do not see it in the eCos
CVS tree.
How/Where can I get it?
Thanks
-----Original Message-----
From: Thomas Asami [mailto:thomas_asami@hotmail.com]
Sent: Friday, May 03, 2002 6:35 AM
To: leosbox@hotmail.com; ecos-discuss@sources.redhat.com
Subject: Re: [ECOS] PXA250 lubbock flash memory question on RedBoot
Leo wrote:
> Maybe I misunderstand the question but why not toggle switch
> S15 which swaps the nCS0/nCS1 chip selects. Check the user's
> guide Flash/Boot memory section.
Because I use my eval board, not Lubbock.
>
> Regards,
>
> Leo
_________________________________________________________________
Join the world's largest e-mail service with MSN Hotmail.
http://www.hotmail.com
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss