This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: i386pc redboot installation files
- From: Rycerz Roman-G11565 <roman dot rycerz at motorola dot com>
- To: "'Ecos Discussion List'" <ecos-discuss at sources dot redhat dot com>
- Date: Wed, 26 Jun 2002 11:41:51 -0500
- Subject: RE: [ECOS] i386pc redboot installation files
Thank you...
Sorry I'm so dense.....
-roman
-----Original Message-----
From: Iztok Zupet [mailto:iz@vsr.si]
Sent: Wednesday, June 26, 2002 11:22 AM
To: Rycerz Roman-G11565; 'Ecos Discussion List'
Subject: Re: [ECOS] i386pc redboot installation files
On Wednesday 26 June 2002 18:08, Rycerz Roman-G11565 wrote:
> Hi
>
> I hope someone can help me.
> When I build redboot for a i386 platform, I only get the redboot.elf
> files
> When I do the same for powerpc platform I get in addition the
> .elf,.bin,.img,.srec
>
> Ideas ???
>
>
>
> Roman F. Rycerz
> Engineering Section Manager
Hi
First, You must select the appropriate CYG_HAL_STARTUP_ROM, RAM or FLOPPY
in
the i386 hal options.
Then go to RedBoot Rom Monitor section to RedBoot hal options. There You
will find the option Build RedBoot binary image, just check it. ( in fact
there are two: CYGBLD_BUILD_REDBOOT_BIN_FLOPPY and
CYGBLD_BUILD_REDBOOT_BIN_ROM)
Regards
iz
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss