This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
init_all_network_interfaces problem with new stack
- From: Christoph Csebits <christoph dot csebits at frequentis dot com>
- To: eCos mailing list <ecos-discuss at sources dot redhat dot com>
- Date: Wed, 10 Jul 2002 14:41:47 +0200
- Subject: [ECOS] init_all_network_interfaces problem with new stack
hi
i got a problem with the new ip stack at initialization,
here is the output:
[cyg_net_init] Init: mbinit(0x00000000)
[cyg_net_init] Init: cyg_net_init_devs(0x00000000)
Init device 'fcc_eth0'
Init device 'fcc_eth1'
[cyg_net_init] Init: loopattach(0x00000000)
[cyg_net_init] Init: ifinit(0x00000000)
IFP: 0x00146430, next: 0x00146564
IFP: 0x00146564, next: 0x001a1568
IFP: 0x001a1568, next: 0x00000000
eth0 XXX: driver didn't set ifq_maxlen
eth1 XXX: driver didn't set ifq_maxlen
[cyg_net_init] Init: domaininit(0x00000000)
[cyg_net_init] Init: cyg_net_add_domain(0x001471c8)
New domain internet at 0x00000000
[cyg_net_init] Init: cyg_net_add_domain(0x00146b90)
New domain route at 0x00000000
[cyg_net_init] Init: cyg_route_init(0x00000000)
[cyg_net_init] Done
Start time client - test
Driver can't set multi-cast mode
BOOTP/DHCP failed on eth0
Driver can't set multi-cast mode
BOOTP/DHCP failed on eth1
Are these lines negligible?
eth0 XXX: driver didn't set ifq_maxlen
Driver can't set multi-cast mode
btw: The "old" ip stack is working well.
its a powerpc based custom board/driver/hal
thanks for hints, regards, christoph
--
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss