This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: Problem in DHCP requests Where is arpcom???


Yes It is building with no errors
I selected INET
is it correct??

bye


----- Original Message -----
From: "Jani Monoses" <jani@iv.ro>
To: "Khasim" <khasim@iwavesystems.com>
Cc: <gary@chez-thomas.org>; <ecos-discuss@sources.redhat.com>;
<ganesan@iwavesystems.com>
Sent: Thursday, July 11, 2002 9:52 PM
Subject: Re: [ECOS] Problem in DHCP requests Where is arpcom???


> that arpcom you mention in eth_drv is surrounded by ifndef CYGPKG_NET
> so it's not compiled if you use the NET package.
>
> struct arpcom is defined by the TCP stacks in
> net/bsd_tcpip/current/include/net/if_arp.h
> and
> net/tcpip/current/include/netinet/if_ether.h
> depending which *BSD stack you use.
>
>
> > Hi Gary Thanks
> > one more question I have The arpcom structure in eth_drv.h shown below
> > struct arpcom {
> >
> > unsigned char esa[6];
> >
> > };
> >
> > but in the eth_drv_init function it is referring
> > ac_if, ac_enaddr ,etc
> > where is this structure I didnt find it.
> > Is my structure incomplete.
> >
> > Thanks
> > With regards
> > Khasim
> >
> > ----- Original Message -----
> > From: "Gary Thomas" <gary@chez-thomas.org>
> > To: "Khasim" <khasim@iwavesystems.com>
> > Cc: "eCos Discussion" <ecos-discuss@sources.redhat.com>
> > Sent: Thursday, July 11, 2002 5:58 PM
> > Subject: Re: [ECOS] Problem in DHCP requests
> >
> >
> > > On Thu, 2002-07-11 at 06:05, Khasim wrote:
> > > > Greetings
> > > >
> > > > I am building kernel + networking along with DHCP support.
> > > > Usually in other OS's the DHCP requests will be sent when the kernel
> > comes
> > > > up which will use fec_send to send the packet out.
> > > > I am not finding any such requests coming  to fec_send function.
> > > > In cyg_start there is cyg_package_start should there be any code for
> > this
> > > > package? Currently there is only blr.
> > > > How should I start the DHCP when kernel comes up.
> > >
> > > note: this is an embedded OS - nothing happens outside your control!
> > >
> > > You have to call 'init_all_network_interfaces()' [or it's equivalent]
> > > for the network to be initialized, which in turn will run DHCP.
> > >
> > >
> >
> >
> > --
> > Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
> > and search the list archive: http://sources.redhat.com/ml/ecos-discuss
> >
>
> --
> Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
> and search the list archive: http://sources.redhat.com/ml/ecos-discuss
>
>


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]