This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Redboot for MBX
- From: Gary Thomas <gary at chez-thomas dot org>
- To: Barton Meeks <bartonm2002 at yahoo dot com>
- Cc: eCos Discussion <ecos-discuss at sources dot redhat dot com>
- Date: 02 Aug 2002 09:25:19 -0600
- Subject: Re: [ECOS] Redboot for MBX
- References: <20020802151810.12091.qmail@web21210.mail.yahoo.com>
On Fri, 2002-08-02 at 09:18, Barton Meeks wrote:
> --- Gary Thomas <gary@chez-thomas.org> wrote:
> >
> > Have you tried to build & run a RAM version? Make
> > sure that works
> > first, then look at the ROM problems.
>
> Hmm, the RAM Redboot works fine. But to get the RAM
> version to work, the 860 has to be initialized at
> least somewhat to get to the RAM.
>
> To be sure I didn't modify anything in the /packages
> directory, I just grabbed a CVS snapshot from your web
> page, and rebuilt the 8-bit ROM against that. I still
> get the machine check at 0xfe0021e8, which is the sync
> command right after the MSR is written to turn on
> address translation. Line 386 of vectors.S.
>
You have a standard MBX? When you get the machine check,
can you see the registers (using your BDM interface)?
> I'm using a Vision Ice BDM with SingleStep to download
> to RAM and burn the flash. My mbx is 40mhz, and I'm
> using the "_40" version of the ecm files.
Actually, I was thinking you could try the RAM version by
first using a known working ROM version.
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss