This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Redboot Baud Rate
Thanks Gary, this does indeed do the job. It's not in the documentation
though..
regards,
craig vanderborgh
voxware incorporated
Gary Thomas wrote:
>
> On Thu, 2002-08-08 at 12:10, Craig Vanderborgh wrote:
> > Hello All:
> >
> > Is it possible to change the baud rate for the Redboot serial console?
> > I am running on an iPAQ H3760, and the baud rate is currently 38400.
> > If I try to set it to 115200 using "fconfig", the new value is
> > accepted, but never honored, even on reset. What's the deal?
> > Is it not possible to set the baud rate to 115200?
>
> Did you try the 'baud' command? I just tried it, using a
> version I recently built, and it seemed to work fine:
>
> RedBoot> bau
> Baud rate = 38400
> RedBoot> bau -b 115200
> Baud rate will be changed to 115200 - update your settings
> Switched terminal to run at 115200 here
> Baud rate changed to 115200 - continue (y/n)? y
> Update RedBoot non-volatile configuration - continue (y/n)? n
>
>
> --
> ------------------------------------------------------------
> Gary Thomas |
> eCosCentric, Ltd. |
> +1 (970) 229-1963 | eCos & RedBoot experts
> gthomas@ecoscentric.com |
> http://www.ecoscentric.com/ |
> ------------------------------------------------------------
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss