This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: AT91EB40 wiggler JTAG programmer
- From: Tim Drury <tdrury at siliconmotorsports dot com>
- To: eCos-Discuss <ecos-discuss at sources dot redhat dot com>
- Date: Fri, 09 Aug 2002 10:08:09 -0400
- Subject: Re: [ECOS] AT91EB40 wiggler JTAG programmer
- References: <1028900317.11374.38.camel@gordon>
Ulrich Dahl wrote:
Hi
I'm working with a AT91EB40 board, I have the same problem as Scott and
Timm with the download of redboot via the Angel debugger. I have
concluded that my problem with the angel monitor and redboot must be in
some sort of faulty software on the board. So I wanted to try the JTAG
port instead...
Ulrich,
Exactly what problem are you having? The only things I recall having
to do is turn on NCS1 (EB40A only - EB40 is fine), and installing
xyzmodem software on my linux box. After that, I could load srecs
and elf images just fine. Although the elf images do take a long time -
they don't seem to stop short as Gary had intended.
Once I had redboot_RAM loaded, it was very easy to get it to
install redboot_ROMRAM.
-tim
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss