This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: RealTek 8139 driver?
Is it necessary to remove I82559 package? I plan to have two interfaces
(I82559 and
rtl8139) on i386 target.
The other problem is after selecting template (i386), either adding rtl8319
package or
removing I82559 package results "add and remove hardware package by
selecting a new
hardware template" message in Windows configuration tool.
thanks,
AL
> I use the ecosconfig tool on Unix, not the windows config tool, but all
you
> should need to do is add the right set of packages after you select your
> target & template. Note that you need the generic Ethernet support as well
> as the chip and board drivers. Here is the list of packages that I use for
> an i386 ISA PC with one of these RealTek cards...
>
> Target: pc
> Template: default
> Added:
> CYGPKG_NET
> CYGPKG_IO_FILEIO
> CYGPKG_IO_ETH_DRIVERS
> CYGPKG_NET_OPENBSD_STACK
> CYGPKG_DEVS_ETH_NS_DP83902A
> CYGPKG_DEVS_ETH_RLTK_ISA8019AS
> Removed:
> CYGPKG_IO_PCI
> CYGPKG_DEVS_ETH_INTEL_I82559
> CYGPKG_DEVS_ETH_I386_PC_I82559
>
> Chris.
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss