This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: Problem with "target remote COM1"


Hi Kishore,
I'm also using the Atmel board, and have found that it's glitchy with
regard to connecting to gdb; I've gotten the "packet error" messages too,
but by hitting the board's reset button several times, and/or just hitting
return at the gdb prompt a few times, the "target remote" command
eventually succeeds. Not an elegant solution...
  \
  Jon Sevy

On Tue, 20 Aug 2002, Kishorekumar D wrote:

> Hi all,
> 
>   I am trying to connect to the Atmel ARM Evaluation
> board using the arm-elf-gdb debugger through the
> serial port. When I used the command 
> "target remote COM1" it tries to connect to the board
> but gives the error message "Ignoring packet error.."
> and says that it was a malformed request.
> I also tried with Tera term pro to connect to the
> board through the serial port and it is successful in
> connecting to it.
> Can someone tell me what could be the problem?
> 
> Thanks in advance
> Kishore
> 
> __________________________________________________
> Do You Yahoo!?
> HotJobs - Search Thousands of New Jobs
> http://www.hotjobs.com
> 
> -- 
> Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
> and search the list archive: http://sources.redhat.com/ml/ecos-discuss
> 
> 


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]