This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: RedBoot with eCos question
- From: Vladimir Sterjantov <vfs at tersy dot ru>
- To: "'ecos-discuss at sources dot redhat dot com'" <ecos-discuss at sources dot redhat dot com>
- Date: Thu, 10 Oct 2002 10:04:57 +0400
- Subject: Re: [ECOS] RedBoot with eCos question
- Organization: Tersy Ltd.
- References: <3DA1733F.2030100@tersy.ru> <m3n0pnbskj.fsf@ecoscentric.com>
- Reply-to: vfs at tersy dot ru
Thank you very much, Nick.
Nick Garnett wrote:
SKIPPED...
2. The working application will not use the PC screen, anything it
prints will go out COM1. Make sure you have the right sort of cable
and that your terminal software is set to the right baud rate
etc. Use RedBoot to check this, since we know this works.
It was the only one my problem: all i should do is to set user_value of
CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT to 2. With default
value 0, all "hello world" output goes to COM1. I don't understand
why i forgot about this, and was stupidly seeing empty screen !
Thank you again.
--
Vladimir Sterjantov
Tersy Ltd., Sarov, Russia,
tel. (83130) 45828
mailto:vfs@tersy.ru
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss