This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
E7t and ethernet
- From: "Chris Garry" <cgarry at sweeneydesign dot co dot uk>
- To: "eCos Discussion" <ecos-discuss at sources dot redhat dot com>
- Date: Thu, 10 Oct 2002 15:41:21 +0100
- Subject: [ECOS] E7t and ethernet
- Organization: Sweeney Design
- Reply-to: "Chris Garry" <cgarry at sweeneydesign dot co dot uk>
I'm using an e7t board (with an additional ethernet PHY) and eCos (net
template plus
the Samsung KS32C5000 ethernet driver).
When I try the following:
err = cyg_io_lookup( "eth0", &handle );
if (ENOERR == err)
{
printf("Found eth0.\n");
}
else
{
printf("Did not find eth0.\n");
}
I find that cyg_io_lookup() has not found the ethernet device.
Should this work (it works for the Serial devices) or am I missing
something?
Also, if I try an:
fptr=fopen("eth0","r+")
the board hangs because the name 'eth0' does not begin with a /.
Thanks.
Chris
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss