This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: error in memchr in compiling eCOS for assabet
- From: "Koeller, T." <Thomas dot Koeller at baslerweb dot com>
- To: 'MIldred Frisco' <mealdread at yahoo dot com>, ecos-discuss at sources dot redhat dot com
- Date: Fri, 11 Oct 2002 12:57:38 +0200
- Subject: RE: [ECOS] error in memchr in compiling eCOS for assabet
Thats what I am using, too, and it works just fine. You should
configure the toolchain as 'arm-ecos-elf', not 'arm-elf'. In order
to link any applications, you also have to provide an empty
libsupc++.a, which can be created by executing the command
'arm-ecos-elf-ar rcs install/lib/libsupc++.a'.
tk
-----------------------------------------------
Thomas Koeller, Software Development
Basler Vision Technologies
An der Strusbek 60-62
22926 Ahrensburg
Germany
Tel +49 (4102) 463-390
Fax +49 (4102) 463-46390
mailto:Thomas.Koeller@baslerweb.com
http://www.baslerweb.com
> -----Original Message-----
> From: MIldred Frisco [mailto:mealdread@yahoo.com]
> Sent: Friday, October 11, 2002 12:36 PM
> To: ecos-discuss@sources.redhat.com
> Subject: Re: [ECOS] error in memchr in compiling eCOS for assabet
>
>
>
> I'm using the latest versions of the tools:
> binutils-2.13.tar.gz
> gcc-3.2.tar.bz2
> insight-5.2.1.tar.gz
>
> Do I have to use the same versions indicated in the
> installation document instead ?
>
>
> Mildred
>
> --- Andrew Lunn <andrew.lunn@ascom.ch> wrote:
> > FAQ:
> >
> > Are using gcc 3.x?
> >
> > If so, read
> >
> http://sources.redhat.com/ecos/tools/linux-arm-elf.html.
> >
> > Andrew
> >
> > On Fri, Oct 11, 2002 at 12:33:05AM -0700, MIldred
> > Frisco wrote:
> > >
> > > Hi ! I am new to eCOS and I am building eCOS for
> > the
> > > Intel StrongARM assabet.
> > >
> > > I tried to configure eCOS using the following
> > > commands:
> > > # ecosconfig new assabet net
> > > # ecosconfig tree
> > > # make
> > >
> > > afterwards it generated the following errors:
> > >
> > > ...
> > > arm-elf-gcc -c ....
> > > /* the error occurs here */
> > > 'void* memchr(const void*, int, long unsigned
> > int)'
> > > defined both normally and as an alias
> > > make[1]: *** ]src/memchr.o.d] Error 1
> > > make[1]: Leaving directory
> > >
> >
> '/ecoscvs/ecos-work/ecosnet/language/c/libc/string/current'
> > > make: *** [build] Error 2
> > >
> > >
> > > how can I solve this problem ? please help me.
> > > thanks in advance.
> > >
> > >
> > > mildred
> > >
> > >
> > > __________________________________________________
> > > Do you Yahoo!?
> > > Faith Hill - Exclusive Performances, Videos & More
> > > http://faith.yahoo.com
> > >
> > > --
> > > Before posting, please read the FAQ:
> > http://sources.redhat.com/fom/ecos
> > > and search the list archive:
> > http://sources.redhat.com/ml/ecos-discuss
> > >
> >
> > --
> > Before posting, please read the FAQ:
> > http://sources.redhat.com/fom/ecos
> > and search the list archive:
> > http://sources.redhat.com/ml/ecos-discuss
> >
>
>
> __________________________________________________
> Do you Yahoo!?
> Faith Hill - Exclusive Performances, Videos & More
> http://faith.yahoo.com
>
> --
> Before posting, please read the FAQ:
> http://sources.redhat.com/fom/ecos
> and search the list archive: http://sources.redhat.com/ml/ecos-discuss
>
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss