This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: Ethernet & serial problem


On Thu, 2002-10-17 at 06:32, Daniel Lidsten wrote:
> Hi,
> 
> When i enable the serial port (SMC1) on my MPC823 then ethernet (SCC2) stops working. I have looked for registers and pins that are the same but cant find any. Any ideas?

You might check to see if the ethernet code is somehow interfering
with the interrupts being used by the serial port (or vice versa).

We have certainly run such a combo here on the MPC860 (MBX board),
using SMC1 and SCC1 for ethernet.

-- 
------------------------------------------------------------
Gary Thomas                  |
eCosCentric, Ltd.            |  
+1 (970) 229-1963            |  eCos & RedBoot experts
gthomas@ecoscentric.com      |
http://www.ecoscentric.com/  |
------------------------------------------------------------


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]