This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

RE: downloading of application in assabet


I found out there's something wrong with the gdb tool.  How do I check if
the serial connection is working ?

-----Original Message-----
From: ecos-discuss-owner@sources.redhat.com
[mailto:ecos-discuss-owner@sources.redhat.com]On Behalf Of Iztok Zupet
Sent: Thursday, October 24, 2002 2:44 PM
To: Mildred Frisco; 'Gary Thomas'
Cc: 'eCos Discussion'
Subject: Re: [ECOS] downloading of application in assabet


On Thursday 24 October 2002 08:33, Mildred Frisco wrote:
> I tried to download test application using arm-elf-gdb
>
>   # arm-elf-gdb thread_gdb
>
> then the graphical gdb will appear showing the source code of the test
> program.  i click File->Target Settings and set it to Remote/Serial,
38400,
> /dev/ttyS0.  then Run->Connect to Target.  after sometime a message
appears
> 'Successfully Connected'.  i then try to download by Run->Download but

If the Successfully Connected appears within a second or two, than the
communication is ok. But if there's a minute or two timeout before it
appears, there must be something wrong with the communication, I'm sure.




--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]