This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Downloaded image of Redboot Not Working
- From: NavEcos <ecos at navosha dot com>
- To: "Vikram Mehta" <vm6580arm at rediffmail dot com>,ecos-discuss at sources dot redhat dot com
- Date: Sat, 26 Oct 2002 20:43:50 -0700
- Subject: Re: [ECOS] Downloaded image of Redboot Not Working
- Organization: Navosha
- References: <20021027033120.4542.qmail@webmail5.rediffmail.com>
- Reply-to: ecos at navosha dot com
On Saturday 26 October 2002 08:31 pm, Vikram Mehta wrote:
> Hi,
>
> I have downloaded Redboot.uu nad Redboot.img from the site given
> here.
> I followed the indtructions as given, to install Redboot
> I use the Hyperterminal Utility to download the E7t
> Two things
>
> 1.)Size shown of Installed Redboot on E7t is 37380 and that shown
> in documentation is 41960
> 2.) More importantly, The Redboot is not working as it should .I
> donot get a REdboot CLI, only jumbled characters and commands
> given in the Documnetation sre not working.
> Infact A typical behaviour is that Keyboard KEys are not being
> echoed proeprly, E.g. when a is typed ,it is echoed back as 'q' or
> 'y' etc.
> What should I do.
This may be obvious, but check your baud rate and your cable connection
to the serial port. It sounds as if you simply have the wrong baud rate.
-Rich
> On Sat, 26 Oct 2002 Jonathan Larmour wrote :
> >Vikram Mehta wrote:
> >>hi,
> >>First of all thanx to Jonathan Larmour for ur response.
> >>
> >>I am downloading RED BOOT.
> >>What is ROMRAM Stratup. I tried to search the net. But found
> >>nothing. From where can I get to know more abt it
> >
> >ROMRAM startup is where the program initially starts in ROM and
> >pretty
> >much straight away copies itself to RAM and runs from there.
> >Other ARM
> >HALs support it, just not the E7T yet. To add it, at a minimum
> >you need to add a new memory startup type, different from ROM or
> >RAM.
> >
> >The best way to find out about it is to look at other HALs. The
> >ebsa285, edb7xxx, at91 and integrator HALs all support it. Search
> >those for "ROMRAM" and look at their ROMRAM memory layouts (in
> >the include/pkgconf subdirectories of their packages).
> >
> >Once you see what's required for them, you would then know what
> >to add to the E7T HAL.
> >
> >>And Any Ideas on Changing ROMC0N0 not working on BSL.
> >>Wll it work on RedBoot. This was my second question that day
> >
> >I have no idea, sorry. I don't know anything about BSL.
> >
> >Jifl
> >-- eCosCentric http://www.eCosCentric.com/
> ><info@eCosCentric.com>
> >--[ "You can complain because roses have thorns, or you ]--
> >--[ can rejoice because thorns have roses." -Lincoln ]--
> >Opinions==mine
>
> __________________________________________________________
> Give your Company an email address like
> ravi @ ravi-exports.com. Sign up for Rediffmail Pro today!
> Know more. http://www.rediffmailpro.com/signup/
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss