This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Downloaded image of Redboot Not Working
- From: "Chris Garry" <cgarry at sweeneydesign dot co dot uk>
- To: "Vikram Mehta" <vm6580arm at rediffmail dot com>,<ecos-discuss at sources dot redhat dot com>
- Date: Sun, 27 Oct 2002 11:00:45 -0000
- Subject: Re: [ECOS] Downloaded image of Redboot Not Working
- Organization: Sweeney Design
- References: <20021027033120.4542.qmail@webmail5.rediffmail.com>
- Reply-to: "Chris Garry" <cgarry at sweeneydesign dot co dot uk>
I had trouble getting Redboot working on the E7T at first. The problem
was that I could not work out how to just download the Redboot image
to the board using HyperTerminal - I tried all options but nothing worked.
In the end I got another terminal program (Tera Term) and all the problems
went away.
FYI: The straight-through cable supplied with the E7T board is correct,
and your serial port should be set to 38400 N 8.
--
Chris
----- Original Message -----
From: "Vikram Mehta" <vm6580arm@rediffmail.com>
To: <ecos-discuss@sources.redhat.com>
Sent: Sunday, October 27, 2002 3:31 AM
Subject: [ECOS] Downloaded image of Redboot Not Working
> Hi,
>
> I have downloaded Redboot.uu nad Redboot.img from the site given
> here.
> I followed the indtructions as given, to install Redboot
> I use the Hyperterminal Utility to download the E7t
> Two things
>
> 1.)Size shown of Installed Redboot on E7t is 37380 and that shown
> in documentation is 41960
> 2.) More importantly, The Redboot is not working as it should .I
> donot get a REdboot CLI, only jumbled characters and commands
> given in the Documnetation sre not working.
> Infact A typical behaviour is that Keyboard KEys are not being
> echoed proeprly, E.g. when a is typed ,it is echoed back as 'q' or
> 'y' etc.
> What should I do.
>
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss