This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: Ethernet stack question
- From: Gary Thomas <gthomas at ecoscentric dot com>
- To: "Cusson, Pascal" <pascal dot cusson at analog dot com>
- Cc: eCos Discussion <ecos-discuss at sources dot redhat dot com>
- Date: 30 Oct 2002 11:42:42 -0700
- Subject: RE: [ECOS] Ethernet stack question
- References: <8FDC0F9BE1F91D44BE964AA54AAA67B6CB65B5@wilmexm3.ad.analog.com>
On Wed, 2002-10-30 at 11:40, Cusson, Pascal wrote:
> Hi Gary,
> Thanks for the little tips once again. When looking in the .ecc file,
> I see the following line:
>
> cdl_interface CYGHWR_NET_DRIVER_ETH0 with a current value at 0. From
> what I read, this cdl is the main point to activate all other packages.
> However the second line states that the value cannot be modified there.
> So where do I modify then ?
>
This means that your ethernet driver isn't implementing the "eth0"
device. Look at the CDL for other ethernet devices to see how it's
done.
> Pascal
>
> -----Original Message-----
> From: Gary Thomas [mailto:gthomas@ecoscentric.com]
> Sent: Wednesday, October 30, 2002 12:53 PM
> To: Cusson, Pascal
> Cc: eCos Discussion
> Subject: Re: [ECOS] Ethernet stack question
>
>
> On Wed, 2002-10-30 at 10:49, Cusson, Pascal wrote:
> > Hi,
> > According to the documentation, the easiest way to configure my
> Ethernet connection is by calling the function
> init_all_network_interfaces. Also according to the doc, this call will
> configure all TCP/IP parameters such as my address, the gateway, the
> mask, etc.
> >
> > My question is, what are the defaults and how do I change them ? I
> tried the find the function init_all_network_interfaces() using a grep
> without succes. Also when I call the init function, is there a simple
> way to make sure everything was properly initialized ? By looking into
> data structure or something ???
> >
>
> This is all set by the CDL, so look in your ecos.ecc file (or
> use the ConfigTool).
>
> The default will be to use DHCP to configure the device unless
> you (using the CDL) specify a particular address, etc.
>
> --
> ------------------------------------------------------------
> Gary Thomas |
> eCosCentric, Ltd. |
> +1 (970) 229-1963 | eCos & RedBoot experts
> gthomas@ecoscentric.com |
> http://www.ecoscentric.com/ |
> ------------------------------------------------------------
>
> --
> Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
> and search the list archive: http://sources.redhat.com/ml/ecos-discuss
--
------------------------------------------------------------
Gary Thomas |
eCosCentric, Ltd. |
+1 (970) 229-1963 | eCos & RedBoot experts
gthomas@ecoscentric.com |
http://www.ecoscentric.com/ |
------------------------------------------------------------
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss