This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: eCos 1.3.1 to eCos2 problems
- From: "Dan Conti" <danc at fullplaymedia dot com>
- To: "eCos Discussion" <ecos-discuss at sources dot redhat dot com>
- Date: Wed, 18 Dec 2002 15:23:25 -0800
- Subject: RE: [ECOS] eCos 1.3.1 to eCos2 problems
I've been using gcc 3.0.3 since it came out on an arm7 core with basically no problems. I have a much older snapshot of ecos, and when i tried to update from that to the last rhepl version i started getting the random crashes - no assertions showed up (yes i had kernel assertions enabled), my boards just stopped working.
So, i've stuck with the older ecos snapshot. gcc 3x has better code generation for arm, which i happen to need for now.
-----Original Message-----
From: Schumacher, Gordon [mailto:gordon_schumacher@maxtor.com]
Sent: Wednesday, December 18, 2002 2:14 PM
To: fredrik@wespot.com; eCos Discussion
Subject: RE: [ECOS] eCos 1.3.1 to eCos2 problems
# From: Gary Thomas [mailto:gary@mlbassoc.com]
# Sent: Wednesday, December 18, 2002 3:09 PM
# To: fredrik@wespot.com
# Cc: eCos Discussion
# Subject: Re: [ECOS] eCos 1.3.1 to eCos2 problems
#
# > * We have tried GCC 3.0.2, GCC 3.0.4 and GCC 3.2.1 (using
# > binutils 2.13.1, newlib 1.10), with the same results. We
# > compile GCC with the arm-elf-gcc target. What is
# > arm-ecos-elf-gcc? Is it needed, in that case, why?
#
# 'arm-ecos-elf-XXX' tools no longer exist. Also, we really
# suggest that you use GCC 2.95.3 for ARM.
Yep - I can vouch that the GCC3 versions do not work worth beans on eCos for
ARM - at least not for the StrongARM builds. It doesn't get anywhere close
to all the way through compilation of eCos...
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss