This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: eb40a application boot
- From: Shannon Holland <holland at loser dot net>
- To: eCos Discussion <ecos-discuss at sources dot redhat dot com>
- Date: Sat, 4 Jan 2003 10:09:46 -0800
- Subject: Re: [ECOS] eb40a application boot
On Friday, January 3, 2003, at 07:35 PM, Gary D. Thomas wrote:
No, this should not be the case.
Are you sure that your application is using HAL_STARTUP_RAM mode?
OK, thanks - I bet this is my problem. I had added a startup mode called
SRAM since my board doesn't have the external RAM. I notice there's a
bunch of places the check for CYG_HAL_STARTUP == "RAM" and so much of
the startup code is probably thinking it's running out of rom.
Perhaps I would be better off to modify the RAM target settings to be
correct for my board rather than adding a new one!
Shannon
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss