This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Problem with building redboot on sh4(se7751)
- From: Jonathan Larmour <jifl at eCosCentric dot com>
- To: koji at akane dot waseda dot jp
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Tue, 08 Apr 2003 03:08:40 +0100
- Subject: Re: [ECOS] Problem with building redboot on sh4(se7751)
- References: <JF20030329162956.110104101@akane.waseda.jp>
koji at akane dot waseda dot jp wrote:
After that,
It booted from flash,I could'nt see boot message,
only see
" ++++++++........ "
Looks like the + could come from the GDB stub, but I have no idea where
the dots come from in that case - looks like it could be the se7751 boot
loader.
As per http://sources.redhat.com/ecos/docs-latest/ref/se7751.html did you see:
Start Addrs = A1000000
End Addrs = A1xxxxxx
Transfer complete
when the cat finished? If not, that would imply it didn't work!
The serial setting of target board is 38400 8N1.
I set Minicom by same parameters.
And no flow control?
Is there anyone who succeed to boot from flash on the se7751 board ?
please give me advice.
Sorry, not me - I'm only replying since no-one else offered suggestions.
Jifl
--
eCosCentric http://www.eCosCentric.com/ The eCos and RedBoot experts
--[ "You can complain because roses have thorns, or you ]--
--[ can rejoice because thorns have roses." -Lincoln ]-- Opinions==mine
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss