Re: [ECOS] cannot reach eCos

["SOMARAJAN,SUNIL (HP-India,unix2)" <Sunil dot Somarajan at hp dot com>]

Well I did configure the information using configtool.
But I am unable to communicate with eCos. (ping/telnet)

redboot picks up dhcp address (15.11.40.75)

configured eCos with static ip (15.11.40.76)
built new targetlib.a

ping 15.11.40.75 - ok
liked hello.c with targetlib.a

egdb -nw a.out
set remotebaud 38400
target remote COM1
load
continue

ping 15.11.40.76 - no response

tried gdb over Ethernet too.

egdb -nw a.out
target remote 15.11.40.75:9000
load
continue

ping 15.11.40.76 - no response

thanx.
Sunil.


Nick Garnett wrote:

> "SOMARAJAN,SUNIL (HP-India,unix2)" <Sunil.Somarajan@hp.com> writes:
>
>  
>
> > Hi,
> >
> > I have an x86 target up and running with ecos2.0. Redboot is
> > configured with 82559 driver and picks up its address via
> > DHCP. (responds to ping/telnet)
> >
> > I need to also configure eCos with a static ip-address. I looked at
> > the archives and found that I can do this by importing a file of this
> > form. I am using configtool under cygwin. Is there a way to assign a
> > static ip to eCos using the configtool and build the targetlib.a
> >    
>
>
> You can change the appropriate configuration options by hand in the
> configtool, or use the File->Import menu item to import your version
> of the import file.
>
>
>  



--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss