Re: [ECOS] arm.inc assembler messages

[Satish Kumar <satish at bvt dot sc dot sanyo dot co dot jp>]

actually i m able to build redboot images for some supported platforms
like the integrator arm966E , e7t ..etc..on cygwin using the same tool.
but when i try building for redboot image for my own platform which i am
now porting..i get this arm.inc assembler errors..
i.e basically i guess its not able to read the symbol names defined in
the arm.inc...
and it displays error message stating Expected Symbol name.

some one plz suggest some solution to solve the above
thanks
satish



On Fri, 04 Jul 2003 15:04:47 +0900
Satish Kumar <satish@bvt.sc.sanyo.co.jp> wrote:

> yes, /ecos-c local directory is mounted by default but not seen..in the
> root directory of cygwin.
> 
> satish
> 
> On Thu, 3 Jul 2003 23:58:01 -0600 (MDT)
> "Gary D. Thomas" <gary@mind.be> wrote:
> 
> > Satish Kumar said:
> > > i m attaching the arm.inc file for ur reference..
> > >
> > > plz some one clear this doubt..
> > >
> > > On Fri, 04 Jul 2003 10:44:23 +0900
> > > Satish Kumar <satish@bvt.sc.sanyo.co.jp> wrote:
> > >
> > >> Hi,
> > >>      i am gettin some arm.inc assembler error on building the redboot
> > >> image for my ARM926J-S based target board..
> > >>    i am using the latest configuration tool on windows 2000, to build
> > >> the image.
> > >> the following message was displayed:
> > >>
> > >> make -r -C hal/arm/arch/v2_0 /ecos-c/saty/build/topaz/test_install/lib/vectors.o
> > >> arm.inc: Assembler messages:
> > >> make[1]: Entering directory `/ecos-c/saty/build/topaz/test_build/hal/arm/arch/v2_0'
> > >> arm.inc:16: Error: expected symbol name
> > >> arm-elf-gcc -Wp,-MD,vectors.tmp  -I/ecos-c/saty/build/topaz/test_install/include
> > >> -I/ecos-c/PROGRA~1/REDHAT~1/ecos/packages/hal/arm/arch/v2_0
> > >> -I/ecos-c/PROGRA~1/REDHAT~1/ecos/packages/hal/arm/arch/v2_0/src
> > >> -I/ecos-c/PROGRA~1/REDHAT~1/ecos/packages/hal/arm/arch/v2_0/tests -I.
> > >> -mcpu=arm9 -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef
> > >> -Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sections
> > >> -fno-rtti -fno-exceptions -fvtable-gc -finit-priority -c -o
> > >> /ecos-c/saty/build/topaz/test_install/lib/vectors.o
> > >> /ecos-c/PROGRA~1/REDHAT~1/ecos/packages/hal/arm/arch/v2_0/src/vectors.S
> > >> make[1]: *** [/ecos-c/saty/build/topaz/test_install/lib/vectors.o] Error
> > >> 1
> > >> make[1]: Leaving directory `/ecos-c/saty/build/topaz/test_build/hal/arm/arch/v2_0'
> > >> make: *** [build] Error 2
> > >> make: Leaving directory `/ecos-c/saty/build/topaz/test_build'
> > >>
> > 
> > This looks like one of the common [FAQ] problems when running the
> > tools on Windows.  Have you made sure that your "/ecos-c" directory
> > is mounted properly?
> 
> -- 
> Satish Kumar <satish@bvt.sc.sanyo.co.jp>
> 
> 
> -- 
> Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
> and search the list archive: http://sources.redhat.com/ml/ecos-discuss

-- 
Satish Kumar <satish@bvt.sc.sanyo.co.jp>


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss