This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: EB40A: Using only port 1 in redboot
- From: Shiv Subramaniam <smaniam at yahoo dot com>
- To: eibach at gdsys dot de
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Wed, 5 Nov 2003 06:22:24 -0800 (PST)
- Subject: Re: [ECOS] EB40A: Using only port 1 in redboot
Thanks Dirk,
That was hepful.
Shiv
--- eibach@gdsys.de wrote:
> Hello,
>
> > Is there a way to compile redboot for using only
> one
> > port (second port) as console in redboot for a
> EB40A
> > derivative build.
>
> Sure. Go to configtool. Turn "Redboot ROM
> monitor->Build Redboot ROM ELF image->Allow RedBoot
> to use any I/O channel for its console." to False.
> Then set "eCos HAL->ARM architecture->Atmel AT91
> variant HAL-> Atmel EB40A eval board HAL->Debug
> serial port" to "1". While you are there you can set
> "Console/GDB serial port baud rate" to a higher
> value if you like (maybe 115200). (You can use that
> baudrate with gdb by the command "set remotebaud
> xxx".)
> After the changes safe, compile and flash it. Have
> fun.
>
> Regards,
> Dirk
>
>
> To: smaniam@yahoo.com
> Cc: ecos-discuss@sources.redhat.com
>
__________________________________
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard
http://antispam.yahoo.com/whatsnewfree
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss