This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
Other format: | [Raw text] |
From: "Xue weihua" <snowweihua@msn.com> To: pred@163.com CC: ecos-discuss@sources.redhat.com Subject: Re: [ECOS] Very strange: fis create/write fail Err = 92 Date: Sun, 09 Nov 2003 23:40:29 +0800
Yes, I have try. I just can write a single block of the flash after unlock a single.
I can't write two more continuous blocks in the same time.
what is reason ? I don't think it is hw problem. do you ?
contentsFrom: "Pred" <pred@163.com> To: "Xue weihua" <snowweihua@msn.com> CC: <ecos-discuss@sources.redhat.com> Subject: Re: [ECOS] Very strange: fis create/write fail Err = 92 Date: Sat, 8 Nov 2003 14:50:36 +0800
When you unlock a single block of the flash, can you successfully write to
it?
If you can do this, but failed to unlock two more continuous blocks and
write to them, I think there may be something wrong with the lock/unlock
procedure.
----- Original Message ----- From: "Gary Thomas" <gary@mlbassoc.com> To: "Xue weihua" <snowweihua@msn.com> Cc: <ecos-discuss@sources.redhat.com> Sent: Saturday, November 08, 2003 1:37 AM Subject: Re: [ECOS] Very strange: fis create/write fail Err = 92
> On Fri, 2003-11-07 at 09:03, Xue weihua wrote:
> > I use the command like "fis unlock -f 0x50040000 -l 0x100000".
> > I think it is good.because it is work on some sectors.
> >
> > Yes,I have problem when I do "fis init",it say "Warning: device> > not erased, some blocks may not be usable".our
> >
>
> You only get this warning if you *don't* use the "-f" option (which
> causes all blocks to be erased)
>
> > maybe,my hw have problem,because it is new one.I have check it withhw0x01008000
> > engineer and he
> > say he will help me check it.
>
> It would be nice to find out what blocks work and which ones fail.
> That might tell you if there is a hardware problem (and where).
>
> >
> >
> > >From: Gary Thomas <gary@mlbassoc.com>
> > >To: Xue weihua <snowweihua@msn.com>
> > >CC: ecos-discuss@sources.redhat.com
> > >Subject: Re: [ECOS] Very strange: fis create/write fail Err = 92
> > >Date: 07 Nov 2003 07:39:58 -0700
> > >
> > >On Thu, 2003-11-06 at 23:20, Xue weihua wrote:
> > > > Hi everyone:
> > > > I have meet a very strange problem on my Intel ixp422 board.
> > > > Flash is Intel TE28F128J3C. After do "fis init ",it show like
> > > > RedBoot> fis list
> > > > Name FLASH addr Mem addr Length Entry point
> > > > RedBoot 0x50000000 0x50000000 0x00040000 0x00000000
> > > > RedBoot config 0x50FC0000 0x50FC0000 0x00001000 0x00000000
> > > > FIS directory 0x50FE0000 0x50FE0000 0x00020000 0x00000000
> > > >
> > > > Then I can't use "fis create/write" to write flash.
> > > >
> > > > RedBoot> load -r -v -b 0x01008000 zImage
> > > > Using default protocol (TFTP)
> > > > -
> > > > Raw file loaded 0x01008000-0x010bbad3, assumed entry at> > > > RedBoot> fis create kernel -b 0x01008000 -l 0x100000 -f0x50040000> > > > ... Erase from 0x50040000-0x50140000: ........code
> > > > ... Program from 0x01008000-0x01108000 at 0x50040000: Err = 92
> > > >
> > > >
> > > > Can't program region at 0x50040000: Error trying to program
> > > >
> > > > But I can use "fis create/write" on "RedBoot config" or "FIS
> > directory".
> > > > so it means hw has no problem. I can write . but only write some
> > sectors.
> > > > It seems these sectors have been done something on by initialize,
but I
> > > > don't
> > > > know what it is . I have try "fis unlock " before "fis
create/write",
> > it is
> > > > no helpful.
> > > >
> > >
> > >Did you actually unlock the pages that will be written during the
> > >"fis create"? What was the command that you used?
> > >
> > >What happens if you try this in some other region of the FLASH?
> > >If you do "fis init -f" (to erase all of the FLASH) - does every
> > >block get erased?
> > >
> > >Finally, there was a small change to the StrataFlash lock/unlock> > >just last week. If you've not tried it, maybe that will help.http://messenger.msn.com/cn
> > >
> > >--
> > >Gary Thomas <gary@mlbassoc.com>
> > >MLB Associates
> > >
> >
> > _________________________________________________________________
> > 涓???虹????杩??浜ゆ?锛??浣跨? MSN Messenger:> --
> Gary Thomas <gary@mlbassoc.com>
> MLB Associates
>
>
> --
> Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
> and search the list archive: http://sources.redhat.com/ml/ecos-discuss
>
>
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
_________________________________________________________________
与联机的朋友进行交流,请使用 MSN Messenger: http://messenger.msn.com/cn
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
-- Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos and search the list archive: http://sources.redhat.com/ml/ecos-discuss
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |