This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: ecos porting to x86


On Tue, 2003-11-11 at 08:25, Carlos Perilla wrote:
> I have recently discovered a  development sistem called Commander-X, X-port.
> It has many desirable capabilities and it's as big as and RJ45  Connector.
> 
> http://www.commanderx.com/productinfo.html
> 
> 10Base-T/100Base-TX auto-sensing Ethernet connection
> 512K/Flash
> 256K/RAM
> 16bit-x86 44Mhz Processor
> 1 Serial I/O port
> 4 Digital I/O Pins
> 
> I want to port eCos to that platform, but it uses an 16bit-x86  is there 
> a way to por eCos there? Has any one done that?

As far as I know, it's not been done before (porting eCos to a 16 bit
processor), but the design is for this to be feasible.  That said, 
expect it to be some work, since it'll be the first time.

What would you want to do with this device?  What sort of software
would you be running?  I'm just asking to get a feel if eCos is the
right solution for you.

-- 
Gary Thomas <gary@mlbassoc.com>
MLB Associates


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]