Re: [ECOS] Error in run tests

["Ricardo Andrino" <ricardo_andrino at web dot de>]

Ok, i will install Redboot into my board but in this link

 http://ecos.sourceware.org/ecos/docs-latest/ref/at91.html 

you can see that a redboot_RAM.elf file is created but for my board AT91EB40A (ecos configuration tool) only the ROM elf file will  be create won't it? No RAM mode image. How should i make it? I i want to run the redboot into RAM memory after i will need the redboot_RAM.elf.
Is there a guide with the full steps for redboot installation?

Thanks in advance



Nick Garnett <nickg@ecoscentric.com> schrieb am 02.12.03 11:53:15:
> 
> "Ricardo Andrino" <ricardo_andrino@web.de> writes:
> 
> > Thanks a lot for your fast answer
> > but i don't understand when you say won't write anything. I want to
> > load my program at address 0x1000000, flash memory and run my
> > program from this memory is it not allowed?  Why does have the board
> > the flash memory?
> 
> Just writing to flash does not program it, you have to do special
> things to program it. The only way to do it is to load a program that
> can do the right things to write to flash. 
> 
> The best way to do this is to load RedBoot. Take a look at the
> following documentation:
> 
> http://ecos.sourceware.org/docs-latest/ref/at91.html
> 
> -- 
> Nick Garnett                    eCos Kernel Architect
> http://www.ecoscentric.com      The eCos and RedBoot experts
> 
> 
> -- 
> Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
> and search the list archive: http://sources.redhat.com/ml/ecos-discuss
> 


______________________________________________________________________________
Horoskop, Comics, VIPs, Wetter, Sport und Lotto im WEB.DE Screensaver1.2
Kostenlos downloaden: http://screensaver.web.de/?mc=021110


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss