This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
spurious interrupt 42 on i386
- From: Chaitanya Huilgol <chaitanya at samsung dot com>
- To: ecos-discuss at sources dot redhat dot com
- Date: Thu, 18 Dec 2003 17:42:23 +0530
- Subject: [ECOS] spurious interrupt 42 on i386
Hi
I am having problem with spurious interrupt on i386 arch.
I have an PIII(copermine) and intel 82559 ethernet card
I have built ecos with default configuration.
The hal_arch_default_isr is called with vector = 42,
This happens only once at startup but the CYG_FAIL at
this point is empty macro and the processing continues.
In the build configuration if I include Hardware serail
drivers for PC channel 1 ( for redirecting the standard
I/O to serail port B)and tty mode serial drivers for tty1
then the CYG_FAIL macro tarnslates to CYG_ASSERT_DOCALL
and the system asserts.
This does not occur if i remove the 82559 card for the
PCI slot. But then again, sometimes it works perfectly fine
even when the card is present in the slot.
I cant seem to figure out the problem , Help.
Regards
Chaitanya H.
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss