This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
PB-0555 .ecm file
- From: Carlos Gonzalez <carlos at aa dot washington dot edu>
- To: ecos-discuss at sources dot redhat dot com
- Date: Fri, 06 Feb 2004 16:54:51 -0800
- Subject: [ECOS] PB-0555 .ecm file
Dear eCos list,
We are working on a project which uses the PB-0555 board from Axiom. I
would very much like to use the RedBoot system (perhaps adding the
networking libraries, though I've read they may not fit). After doing
some fiddling, I've got all the tools installed on my Linux box and can
compile a RedBoot install, however I'm using the redboot_ROM.ecm file
for the cme555 and encountering problems because of differences in the
memory map. I was wondering if anyone had created a .ecm file for use
with the PB-0555. My impression is that I can then import this file with
the configtool, compile my OS, then use the objcopy command to create an
S19 file and then transfer it to the board over minicom. If anyone
either has an appropriate .ecm file or has some modifications to the
cme555 file I could perform, I would appreciate it. Thank you very much.
Carlos Gonzalez
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss