This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
about porting ecos in S3C4510B development board
- From: "Hu Ying" <ying_hu at alliedtelesyn dot com>
- To: <ecos-discuss at sources dot redhat dot com>
- Date: Wed, 11 Feb 2004 12:17:49 +0800
- Subject: [ECOS] about porting ecos in S3C4510B development board
- Reply-to: <ying_hu at alliedtelesyn dot com>
Hi all,
I just started working on porting eCos on my S3C4510B based development
board which uses S3C4510B, 16MByte SDRAM, 2MByte Flash (AM29LV160).
I tried to build a Redboot based the SNDS100 package provided in eCos.
But haven't succeeded :-(. I modified hal_arm_snds.cdl, the
mlt_arm_snds_ram/rom.h/ldi, but I could see anything from the Hyperterminal.
Please drop me somp advice.
Do I need to include Flash driver for Redboot? How should I set the
serial port if I want to use the Hyperterminal with my ARM board? shall I
choose S3C4510A or KS32C5000A?
Thanks!
H.Y Roger
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss