This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Strange error Can't program region at 0x50040000 Error trying to program (Err=92)
- From: Mark Salter <msalter at redhat dot com>
- To: madhusudhan dot gowda at wipro dot com
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Fri, 14 May 2004 07:49:32 -0400 (EDT)
- Subject: Re: [ECOS] Strange error Can't program region at 0x50040000 Error trying to program (Err=92)
- References: <0BCBFEACE44CF0469CF5EBF7F6B6125301213D80@chn-snr-msg.wipro.com>
> Hi ,
> I have meet a very strange problem on my Intel ixp425 board.
> This error appeared for only is Intel J3C and not for J3A Flash.
> one strange thing is I could able to program 1 or 2 blocks and not more
> than that.
J3C parts power up with the lock bits set. Use "fis unlock ..." to
unlock the area of flash you want to write. Also, you may need to
upgrade your RedBoot. A recent fix was added to mask out reserved
status bits which caused locking problems on J3C parts.
--Mark
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss