This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Getting RedBoot[ROM] into the Phytec PhyCORE-MPC555
- From: mserrano at engin dot umich dot edu
- To: ecos-discuss at sources dot redhat dot com
- Date: Tue, 8 Jun 2004 15:57:59 -0400
- Subject: [ECOS] Getting RedBoot[ROM] into the Phytec PhyCORE-MPC555
Hi Dragos and eCos list,
We are currently trying to get RedBoot[ROM] into internal flash using
CodeWarrior 8.0 flash programmer. We are using Phytec's
phyCORE-MPC555_BDM_init.cfg as the target initialization file and
converting the redboot.elf file generated by the configuration tools into
a Motorolla S-record file (S3) (this is the file that we are actually
trying to burn into internal flash). Unfortunately this is not working. This is
what the flash programmer log looks like:
======================================================================
=== Execute: Program
=== Timestamp: Tue Jun 8 15:29:38 2004
=== Flash Device: MPC555
=== Flash Organization: 448Kx8x1
=== Flash Mem Start Addr: 0x00000000
=== Flash Mem End Addr: 0x0006FFFF
======================================================================
Using restricted address range 0x00000000 to 0x0006FFFF
Using Algorithm: mpc555.elf
Loading Flash Device Driver at: 0x00C00000
Flash Driver Buffer is at: 0x00C029E0
Flash Driver Buffer Size is: 0x00003620
Done
Initialization Command Succeeded
Programming file C:\Software_stuff\redboot_rom.srec
Programming 0x00010000 bytes of Target Memory at 0x00000000
Flash Programmer: Flash driver reports the following error(s): Chip
reported error during program
Did you use CodeWarrior's flash programmer? Does anyone know of a different
method of programming into internal flash?
Thanks,
Miguel J. Vega
FEGI C&DH Team
University of Michigan
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss