RE: [ECOS] Toolchain question

["Oscar" <martinos72 at libero dot it>]

I bought the board the last year from an Italian company. The system include
LCD, Box, speaker and obviously the bord. The schematic's board look like
the INTEL EVB but with only SDRAM,SRAM,FLASH,CF,LCD,AUDIO, USB and RS232.
Redboot/Ecos runs with the MPC template. 
Bye
OSCAR
 
Oscar Martinelli
martinos72@libero.it
-----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org
[mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Neundorf,
Alexander
Sent: mercoledì 23 giugno 2004 7.23
To: Oscar; ecos-discuss@sources.redhat.com
Subject: AW: [ECOS] Toolchain question

Hi Oscar,

> Does anyone know which is the different between the
> "ecoscentric-gnutools-arm-elf-1.4-2.cygwin" and the
> "i686-pc-cygwin-x-xscale-elf" that i've downloaded from
> www.intel.com/design/intelxscale/dev_tools/021022/RedHat_021022.htm.
> 
> I'm going to work with ECOS and INTEL XSCALE PXA255 
> processor, the question
> is: which Toolchain is more suitable for build my applications?
> Thanks

You can use the arm-elf tools for the pxa25X, somewhere I heard that the
main difference to the xscale-elf tools is the name ;-)
What kind of hardware do you use ?

Bye
Alex

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss




--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss