This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

How and where does one configure the serial port settings for Redboot


Hello,

I am trying to understand how Redboot sets up its serial port connections
for terminal access. I have an IXP425 custom board with 1 UART. On the
IXP425 this is called the console UART as opposed to the other high speed
UART. The board receives its firmware image fine (I can flash the board
through the JTAG port), but am at loss at getting the Redboot console. I
have looked at all of the web sources of information but am at a loss..

can someone advise me how to proceed further?

Thanks!
Krishna

-------------------------------------------------


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]