This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: Re: Help: arm-elf-gdb com1 error
- From: "Tony Butt" <tjb at cea dot com dot au>
- To: <ecos-discuss at sources dot redhat dot com>
- Date: Thu, 22 Jul 2004 15:26:54 +1000
- Subject: RE: [ECOS] Re: Help: arm-elf-gdb com1 error
- Organization: CEA Technologies
I think cygwin now requires /dev/com1
Tony Butt
-----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org
[mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Grant Edwards
Sent: Thursday, 22 July 2004 3:22 PM
To: Pablo Bleyer Kocik
Cc: ecos-discuss@sources.redhat.com
Subject: [ECOS] Re: Help: arm-elf-gdb com1 error
On Thu, Jul 22, 2004 at 01:07:50AM -0400, Pablo Bleyer Kocik wrote:
>>I am using Atmel EB40A evaluation board (AT91R40008 processor
>>ARM7 core based) to test my projects. I was trying to connect
>>to the target board using the arm-elf-gdb.exe, but when I
>>specified the serial port connection as target I got the
>>follosing error:
> >
> >GDB
> > com1: No such file or directory
>
> Try using /dev/ttyS0.
Does Cygwin map /dev/ttyS0 to COM1? I always used COM1 as the
device name under Cygwin.
--
Grant Edwards
grante@visi.com
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss