This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: HyperTerminal
- From: Muna Hummady <muna_hummady at yahoo dot com>
- To: ecos-discuss at sources dot redhat dot com
- Cc: Nick Garnett <nickg at ecoscentric dot com>, amassa at san dot rr dot com
- Date: Thu, 5 Aug 2004 01:35:39 -0700 (PDT)
- Subject: [ECOS] Re: HyperTerminal
--- Nick Garnett <nickg@ecoscentric.com> wrote:
>
> Please keep the discussion on the ecos-discuss list.
> Directly
> addressed messages may be ignored. Personal support
> is only available
> on a consultancy basis.
>
>
> Muna Hummady <muna_hummady@yahoo.com> writes:
>
> > > hello
> > Please there is some thing I could'nt understand
> it
> > and could'nt do it.
> > When I'm doing on the host target
> > (gdb) target remote /dev/ttyS0
> > you tell me that the host is connected to the
> remote
> > target and I could load any test file to the
> remote
> > target through HyperTerminal. when I'm doing that
> > instruction the remote target halted and the
> keyboard
> > halted so i could'nt do anything on the remote
> target.
> >
> > please tell how to solve this problem?
>
> This is not what I'm telling you at all. Run
> HyperTerminal without
> running GDB to check that the target RedBoot is
> functioning
> correctly. Only when you are sure of that should you
> then run GDB.
>
> --
> Nick Garnett eCos Kernel
> Architect
> http://www.ecoscentric.com/ The eCos and RedBoot
> experts
>
>
hello freinds
I'm trying to talk to RedBoot via the serial port.
1-could you tell me who to run the HyperTerminal on
Linux.
It is the same of terminal?
What is the procedure to do this?
2- when I'm trying to connect RedBoot to the host
target (Linux)via serial port
can I use only one port for connection and debugging
test application without conflict, because I have one
port on my i386 PC????
Best regads
Muna
__________________________________
Do you Yahoo!?
Read only the mail you want - Yahoo! Mail SpamGuard.
http://promotions.yahoo.com/new_mail
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss