This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Problems with cyg_io_read
On Fri, Aug 20, 2004 at 09:52:33AM -0700, Amanda Heyward wrote:
> Hi Andrew,
> Thanks for the reply. I'm using the anon-cvs, as
> that is the only way to get the EB40A working. I
> assume that choosing the EB40A template also selects
> the drivers from the anon-cvs. my serial port speed is
> 115200. and I'm not using any flow control.
Thats quite a high speed. Try lower speeds and see if that makes any
difference.
You say it works with hyperterminal. I suppose you are typing the
input? If so the effective baud rate will be more like 50 baud, which
could be why its working.
Andrew
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss