This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: redboot on IXDP425


jerzy dyrda wrote:

On Tuesday 11 January 2005 16:55, Mark Salter wrote:


On Tue, 2005-01-11 at 18:47 +0300, Nickolay wrote:


Mark Salter wrote:


On Tue, 2005-01-11 at 18:17 +0300, Nickolay wrote:


Hello Guys!

Anyone know, how i can install redboot on IXDP425 target?
I has vxWorks bootloader installed, and i need rewrite them or boot
redboot on them.


The flash is socketed on the IXDP425, so you can use a device
programmer. The alternative is to use a jtag based flash
programmer.

--Mark


That's true!
But maybe anyone know how load redboot via vxworks bootloader?
Can i use redboot.bin for this purpose, or redboot.bin is for upgrade
redboot from redboot the self?


redboot.bin is just a raw binary image. It needs to get programmed
to the start of flash. I'm not sure about the vxworks bootloader
capabilities.

--Mark



Hello


I heard from vxWorks guys - it isn't possibility to write image by vxWorks bootloader and this bootloader don't configure hardware e.g PCI - Do you have other loader?

Best Regards,
jerzy



No, i has only vxWorks bootloader on the flash :(
If no way to boot redboot from vxWorks, i need order flash-programmer, but this spent so long time...



-- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]