This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
HELP Unable to ping the device
- From: "Mukund JB." <mukundjb at esntechnologies dot co dot in>
- To: "Winkler Andreas" <andreas dot aw dot winkler at siemens dot com>, <mohit dot palsingh at wipro dot com>, <ecos-discuss at sources dot redhat dot com>
- Date: Fri, 25 Feb 2005 18:58:50 +0530
- Subject: [ECOS] HELP Unable to ping the device
Hello all,
Sorry, the previuus mailwas with a wrong subject.
I am working on cirrus logic BSP & using EBD19312 board. I am unable to
ping the device.
I am able to see the redboot prompt on my minicom. As I don't have a
BOOTP on my network(cross cabled), I have configured the IP using
ip_address command of redboot.
The steps I followed are
1) Connected to the host through cross cable (Host running tftp server).
2) D/W the Redboot using serial cable.
3) executed the following command successfully
fis init -f
fconfig -i
ip_address -l 100.100.100.43 -h 100.100.100.13 ( NO DHCPd/
BOOTp)
After that, when I ping to HOST(100.100.100.13), it returns TIMED OUT.
I am using a Intel 82557/8/9 ( cat/proc/pci entry shown card). I am not
able to guess the problem.
It will be very helpful if u can help me out in this.
Regards,
Mukund jampala
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss