This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Porting RedBoot to ARM9 based OMAP5912 - Doubt.
- From: Pradeep Padmanabhan <mailme dot pradeep at gmail dot com>
- To: ecos-discuss at sources dot redhat dot com
- Date: Wed, 16 Mar 2005 20:18:52 +0530
- Subject: [ECOS] Porting RedBoot to ARM9 based OMAP5912 - Doubt.
- Reply-to: Pradeep Padmanabhan <mailme dot pradeep at gmail dot com>
Hi all,
I am a newbee to eCos Porting. As a part of my learning I am trying to
port RedBoot to a ARM9 based OMAP5912 platform. The platform already
has U-Boot running on it and I want to port RedBoot alongside in RAM
startup mode.
Using the configuration tool (ver 2.0 in Linux) and hand editing the
.h and .ldi files I was able to build a .bin image. When I tried to
load this image and execute it on the omap 5912 OSK, the RedBoot
prompt does not appear. The system just stays there without any
messages.
I am loading the .bin image at the address 0x10000000 which I have
mapped as RAM origin and execute it using the 'go' command.
Any suggestions on what lines to proceed would be great.
Thanks,
Pradeep P
mailme.pradeep@gmail.com
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss