This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Redboot problem with EBD9312 - help
- From: Marcin Glogowski <marcin dot glogowski at interia dot pl>
- To: "Mukund JB." <mukundjb at esntechnologies dot co dot in>,ecos-discuss at ecos dot sourceware dot org
- Date: Fri, 18 Mar 2005 20:01:33 +0100
- Subject: Re: [ECOS] Redboot problem with EBD9312 - help
- References: <4EE0CBA31942E547B99B3D4BFAB348113F4D05@mail.esn.co.in>
Hi,
Sorry for a silly question - did you try "fis init -f"?
I had the same problem with my kernel (I had mess on my screen instead
of the linux decompressing message) - I solved that by setting my
hardware mac.
Regards.
Sorry, the attachment missed.
I am working on the new EBD9312 boards we got today.
I have downloaded the redboot.bin successfully; I hooked the network
cable.
When we start the board for the first time after installation of redboot
we get the following message just before the redboot prompt:-
+Flash configuration checksum error or invalid key
EP93xx - no EEPROM, static ESA, or Redboot config option.
No network interfaces found
----------------------------------------------------------------------
Startuj z INTERIA.PL!!! >>> http://link.interia.pl/f1837
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss