This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Redboot and NAND flash on CS6
- From: Nickolay <nickolay at protei dot ru>
- To: Gary Thomas <gary at mlbassoc dot com>
- Cc: eCos Discussion <ecos-discuss at ecos dot sourceware dot org>
- Date: Wed, 13 Apr 2005 23:30:36 +0400
- Subject: Re: [ECOS] Redboot and NAND flash on CS6
- References: <425D6E80.9050205@protei.ru> <1113419987.13101.183.camel@hermes>
Gary Thomas wrote:
On Wed, 2005-04-13 at 23:09 +0400, Nickolay wrote:
Hallo Guys!
I has IXDP425 based board with 8Mb NOR flash and Samsung NAND flash
128Mb(K9F1G08UOM).
Redboot boot from 8Mb NOR flash(CS0).
After booting, i successfull make read/write on NOR flash, but how i can
address 128Mb NAND flash, which connected to CS6?
Look at the TAMS MOAB platform - it has a similar arrangement.
Of course, if you want to access both types of FLASH at once, you'll
need to use the flash_v2 branch.
Hmmm...
grep -r CS packages/hal/powerpc/moab/
doesn't find any CS definition.
Why?
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss