This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Problem booting Linux with Redboot v1.94 on IXP425
- From: s dot s-c-h-m-i-t-t at web dot de
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Tue, 24 May 2005 01:52:12 +0200
- Subject: [ECOS] Problem booting Linux with Redboot v1.94 on IXP425
Hi there,
After updating to Redboot´s v1.94 I can´t boot the 2.4.19-rmk6 kernel
any more. I adapted Redboot successfully (I guess) for my IXP425-Target
which has no PCI NIC, 128MB SDRAM and the second UART only usable.
After initializing Redboot (fis init) I load the zImage and start it:
> load -r -v -b 0x01600000 zImage
> go 0x01600000
After this there is no message any more. The kernel seems to stick -
BID2000, however, says the target is running. The same with prebuilt
uClinux Images for the ixdp425.
When doing this with the old v2.00 (v1.5) Redboot with the kernel
everything works fine.
Any comments or hints???
Regards,
Stefan.
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss